Stainless Steel
Duplex 2205

Printable Version (PDF)

 
Specifications (ASTM/ASME)
Alloy UNS Designation Material
Specification
Tubing
Specification
Pipe
Specification
2205 S31803/S32205 A 240/SA-240 A 270 A 790/SA-790
      A 789/SA-789 ---
Chemical Composition (%)
Alloy 2205 2205
UNS Designation S31803 S32205
Carbon (C) max. 0.030 0.030
Manganese (Mn) max. 2.00 2.00
Phosphorus (P) max. 0.030 0.030
Sulfur (S) max. 0.020 0.020
Silicon (Si) max. 1.00 1.00
Chromium (Cr) 21.0 - 23.0 22.0 - 23.0
Nickel (Ni) 4.5 - 6.5 4.5 - 6.5
Molybdenum (Mo) 2.5 - 3.5 3.0 - 3.5
Nitrogen (N) 0.08 - 0.20 0.14 - 0.20
Iron (Fe) Balance Balance
Typical Physical & Mechanical Properties - Annealed Condition (Room Temperature)
Alloy UNS Designation Minimum Tensile Strength
Minimum Yield
Strength
0.2% Offset
Minimum Percent (%)
Elongation in
2 inches (50.8 mm)
(psi) (MPa) (psi) (MPa)
2205 S31803 90,000 620 65,000 450 25
2205 S322051 95,000 655 70,000 485 25
2205 S322052 95,000 655 65,000 450 25

1 Per ASTM/ASME A 270 and A 789/SA-789 specifications.

2 Per ASTM/ASME A 790/SA-790 specifications.

 

Disclaimer: Johnson Tube Company™, a division of Johnson International Industries, Inc., has gathered the information contained in this website from many different sources. To the best of our knowledge, all information is correct and accurate at the time of publication, but is intended to supply general information only. The information presented here is given as a guide, for reference purposes only and should not be used as technical/design specifications. The reader must make their own evaluation, based on their own research and more specific information than that supplied here, by Johnson Tube Company™, all information must be verified by the reader. Johnson Tube Company™, a division of Johnson International Industries, Inc., are processors and re-sellers of these materials and makes no guarantees or warranties, either expressed or implied, regarding the accuracy of the information supplied or the suitability of any material for any application. Information and specifications are subject to change without notice.

Not all products are produced by Johnson Tube Company™, a division of Johnson International Industries, Inc., but all products meet or exceed stated specifications.